What’s more, painting a room is a quick project we can easily tackle ourselves without calling in the professionals, saving us extra cash. While it may seem like a simple task, there are some tips and tricks of the trade to know before you start. Common mistakes can often happen without the right preparation, so it’s vital to know how to paint a room properly to get those professional results. So whether you fancy a fresh color for or simply want to revamp a tired-looking room, here’s how to paint a room like a pro in nine easy steps. And be sure to check out our guide on how to paint a ceiling without making a mess. If you’re stripping walls, you’ll need to know how to remove wallpaper before painting. If you’re selling up, these 9 decor tips could help you sell your house fast! Or if you have any unsightly marks, check out how to remove water stains from wood and walls. And here are 7 entryway ideas to impress guests.
How to paint a room
1. Prep the room for painting
— First, move furniture and fixtures out of the room or away from the walls into the center of the room. Cover furniture with protective drop cloths. Drop cloths Putty knife Caulk Paint brushes (both angled and straight) Paint roller Paint tray Stir stick Paint swatches Paint — Remove outlet and light switch plates to prevent any paint getting on them, and cover what remains with painter’s tape. — Ensure there is proper ventilation before painting to eliminate the build-up of paint fumes by opening a window or door.
2. Repair the walls
— Once dry, lightly sand the area with a fine 220-grit sandpaper or sanding sponge to smoothen the surface. Then, wipe the surfaces clean with a damp cloth and allow to dry again.
3. Apply painter’s tape
— Next up, apply painter’s tape around your skirting, windows, light sockets and doors to prevent paint bleeding through.
4. Sample the paint
— Test a sample of the paint first to give you an idea of how the color will look. Often the color charts look different to reality, so paint two coats of your chosen color in a 12 x 12 inch square to see what it looks like on your wall. — If you don’t want to test directly onto the wall, you can paint two coats on a foam board and tape it to the wall. This will also save you the hassle of repainting a room if you don’t like the final color.
5. Prime the walls
— You’ll need to prime your walls before painting, especially when you’re painting over a dark color with a lighter tone or want to hide unsightly stains. Using a good quality primer is essential; it will help seal the wall and prevent mold. — First, dip a paint brush into the primer and “cut in” 2- to 3-inch bands of primer around the edges, corners and frames of a room. Then, pour the primer paint into a tray, dip your roller brush in until it’s covered, roll off the excess, and start painting the primer onto the wall. Professionals recommend to work top to bottom, followed by rolling back and forth across the wall in V or W-shaped strokes until the section of wall is covered. This will ensure good coverage. — Leave to completely dry before painting. Most latex primers can take between 30 minutes to one hour to dry, while oil-based primers can take up to 24 hours to fully dry. Follow the given instructions for time to dry.
6. Sand your wall primer
— Once the area is smooth, wipe the wall clean with a damp towel or sponge and allow it to dry.
7. Mix the paint
— Open the can of paint and always mix the paint thoroughly with a wooden stir stick before use. This is because the ingredients tend to separate, especially after sitting for a long period of time. This will ensure that the color and finish will look consistent.
8. Paint your walls
After all the prep work, you can finally paint your walls with a roller brush and a paint brush. — Start by using an angled brush to “cut in” with a two-inch painted line around the edges of shirting boards, door frames and the ceiling. Then, pour your chosen paint into the tray and fill to about ¼ of the capacity, before rolling your roller brush back and forth in the paint, and pressing off the excess. — Using your roller brush, start working from the top to the bottom of the wall. Then roll back and forth across the entire wall in a series of V or W-shape strokes for a more even coat. — Leave the first coat to completely dry (to the touch) before applying another. It’s recommended to paint at least two coats to get a more rich and vibrant color finish.
9. Clean up time
— Once your walls are painted and dry, remove the painter’s tape from around the walls and borders. Avoid leaving on for too long as small pieces of tape can break away and leave residue. — Then, decant the tray’s leftover paint back into the tin before sealing the can tightly. If it’s tricky to seal due to dried paint around the edges, tap the lid’s edges gently with a hammer to close. — Next, rinse the tray with warm soapy water and thoroughly clean your paintbrush and roller. Finally, leave the brush bristles and roller to fully dry before putting away.
How long does it take for paint to dry?
Latex or water-based paints are usually dry to the touch after one hour and you can recoat within four hours. While oil-based paints take much longer and are dry to the touch between six to eight hours. In this case, you’ll need to wait 24 hours before you can recoat. Be sure to check the instructions on the paint label to confirm specific dry times.
Here’s how to wallpaper a room like a pro so you save a ton of money. Had an accident? Here’s how to get paint out of the carpet, and if you want to maintain your walls, here’s how to clean painted walls to remove stains
